Fetal Monitor FC 700
Fetal Monitor FC 700 from Bionet
- built-in CTG analysis function supports making diagnoses
- large 7-segment LED display for fetal heart frequency and uterus contractions
- measuring of fetal heart frequencies, contractions and fetal child movements
- high sensitivity, ultrasound frequency 1 MHz with an output performance < 10 mW/cm²
- measurement range: 50 – 240 beats per minute
- contraction measuring range: 0 – 99 units
- alarm function for abnormal heart frequency
- integrated thermal printer
- weighs under 3 kg
Model FC 700 Doppler specification Pulsed doppler ultrasound frequency: 1.0 megahertz Intensity < 10 mW / cm2 FHR range: 50 – 240 bpm, FHR accuracy: ± 1 bpm Fetal movement source Ultrasound pulsed doppler UC external type frequency response DC ~ 0.5Hz reference control measuring range 0 ~ 99 Einheiten Printer speed 1,2,3 cm/min paper, with feeding function Display 7-segment LED 2 channels (HR, UC) Notification Heart rhythm, with alarm function, printer on and in standby mode Sounds Doppler, alarms, informational Set-up Alarm; too-high/low recording speed; apper grid; fetal movement on/off; data; printer contrast, auto-print period Function Event marking, automatic fetal movement recording Power supply AC 100-240 volts (50/60 hertz) Output: DC18v, 2.5 Amp, 80 watts Measurements (mm) 296 x 305.5 x 92.5 (w x h x d) Weight 2.9 kg External Link RS-232C Optional program download function Standard accessory Ultrasound doppler
HNE Dopplex Vascular Doppler
HNE Dopplex Vascular Doppler from Huntleigh
Pocket ultrasound doppler for unidirectional blood vessel examination with a 5 Mhz probe.
The Mini Dopplex is very well-suited for quickly assessing vessel condition and measuring peripheral blood pressure. Analog output permits documenting of examination results, for example, through an ECG machine.
Weighing only 295 Gramm and measuring only 14 x 7.4 x 2.7 cm, this instruments is one of the smallest vascular dopplers in the world.
The Mini Dopplex offers multiple possibilities for examining arterial and venous systems.
Five different probes (2, 4, 5, 8 and 10 MHz) with differing penetration depths can be hooked up.
A special noise filter optimizes quality of the doppler signals, audible over the built-in speaker or earphones.
Automatic shut-off ensures long battery life.
- Multi Dopplex II – MD2: bi-directional pocket doppler with forward- and back-flow rate, probe frequency, speaker and RS232 interface
- LCD display with operational readiness indication
- automatic probe frequency detection
- active noise suppression
- Mini Dopplex: unidirectional pocket doppler with ear phone connection and analog outpout.
Pocket-Doppler Handydop from ELCAT
Each probe contains a transmitting crystal, which continually emits ultrasound. If the ultrasonic wave encounters a moving structure, the reflected ultrasound changes frequency in accordance with the Doppler-principle. the frequency-modulated signal is captured by the probe’s transmitting crystal and transmitted for signal-processing, which determines the amount of Doppler-shift. This is the difference between the sent and received signals, and is proportional to the speed with which the reflectors move. The Handydop therefore provides you a signal that reflects the flow-rate of blood or characteristic noises of the fetal heart.
- Basic unit without ultrasound probe
- exemplary handling
- sending- and receiving-electronics integrated into the probe’s plug
- high sensitivity for capture of even the smallest vessels
- probes are easily exchanged
- low operation costs through power-pack
With the ELCAT Handydop, you now cover all areas of your unit-directional doppler-sonography. Optionally connectable ultrasound probes with frequencies of 2, 4 and 8 MHz make it an ace for expert proof of fetal heart activity in the early stages of pregnancy or for arterial and venous vessel-diagnostic. Its new sending- and receiving-technology, integrated into the probe’s plug, guarantees that every ultra-sonic probe is optionally adjusted for its respective application area – for uncompromised signal-quality.
Where, up to now, probe-plugs had to be connected through complicated screwing-mechanisms, now light pressure onto a locking-key is sufficient for you to effortlessly pull the plug. Insert the new probe-plug until a soft ‘click’ indicates correct fit – done!
Video Printer P93E
Video Printer P93E from Mitsubishi
Fast, precise and at the same time very efficient
This is the standard that the new analog black and white video printer has set for itself. 256 shades of grey and 325 dpi resolution guarantee detailed, high-contrast print jobs – and this in a brisk 3.9 seconds. Simultaneously, the picture memory delivers up to 10 frames to the P93E that can be selected individually afterwards.
- high picture resolution
- low operating cost
- simple to operate
- quick print jobs
Wide choice of options
The P93E can print selected parts of a picture. In 0.1 increments you can print pictures enlarged by a factor of from 0.3 to 2.0. Brightness and contrast have up to 39 separate settings (from -19 to +19).
All picture edits can be set from the control panel in front and are displayed on an LED. Exceptional performance in a compact package. The Mitshubishi P93E is markedly smaller than its predecessor and it weights only 2.8 kg. That makes it possible to also use the P93E on mobile instrument platforms.